1.1 Introduction of Metallurgy, mineral, ore, gangue or matrix, flux and slag,

Concentration methods of the ores. roasting, calcination, smellting and

refining as applied in relation to various metallurgical operations

1.2 Metallurgy of (i) Aluminum (ii) Iron

1.3 Definition of an alloy, purposes of alloying, composition and uses of alloys like

magnalium, duralumin, alnico, invar and stainless steel.

2.1 Introduction of ‘Fuel’, characteristics of a good fuel and classification of fuels

with suitable examples

2.2 Definition of Calorific value of a fuel and its determination for a solid fuel with

the help of Bomb calorimeter with simple numerical problems.

2.3 Manufacture, composition, properties and uses of (i) Water gas (ii) Oil gas (iii)

Biogas (iv) Compressed Natural gas (CNG) 2.4 Octane Number ,Cetane

Number and Power alcohol

2.4Nuclear Fuel-Fission and fusion.

4.1 Definition of (i) lubricant (ii) lubrication

4.2 Classification of lubricants

4.3 Principles of lubrication

        (i) fluid film lubrication

        (ii) boundary lubrication

4.4 Properties of lubricants

4.5 Importance of additives in lubricants

4.6 Dewaxing and solvent refining of liquid lubricants

5.1 General introduction to cement, varites of cements raw materials of cements.

5.2 Manufacture of Cement (i) Wet Process (ii) Dry Process. Setting and Hardening

of cements.

5.3 Defination of Glass, Different varity of glass, raw material, Manufacture of

glass.

6.1 Classification of Organic Compounds, functional group, Homologus Series,

difference between organic and inorganic compound.

6.2 Physical and Chemical properties and industrial use of Organic Compound

6.3 IUPAC system of nomenclature of Carboxylic acid, Alcohols, Phenols,

Aldehydes, Ketones and Amines (first five members of each series only).

7.1 Introduction and Definition of Polymers.

7.2 Plastics-

7.2.1 Classification and constituent, Type of polymerization Thermoplastic

and Thermosetting polymer .

1. Gravimetric analysis and study of apparatus used there in.

2. To determine the percentage composition of a mixture consisting of a volatile and a

non-volatile substances.

3. Estimate the amount of moisture in the given sample of coal. 

4. Esterification and

ceric ammonium tests of alcohol.

5. Sodium carbonate and Ester test of carboxylic acids

6. To determination the amount of copper in the given sample of copper sulphate with

the help of N/20 sodium thiosulphate solution.

7. Detection of metal iron in the rust (solution of rust in concentrated HCR may be

given)

8. Demonstration to determine calorific value of a solid fuel with the help of Bomb

Calorimeter.